| 12 | | If you installed a recent 0.11 version of Trac via {{{easy_install}}}, it might be the easiest to use it also to upgrade you Trac installation. |
| 13 | | |
| 14 | | {{{ |
| 15 | | # easy_install --upgrade Trac |
| 16 | | }}} |
| 17 | | |
| 18 | | If you do a manual (not operating system specific) upgrade, you should also stop any running Trac server before the installation. Doing "hot" upgrades is not advised, especially not on Windows ([trac:ticket:7625 #7265]). |
| 19 | | |
| 20 | | You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac .eggs from former versions. |
| 21 | | The location of the site-packages directory depends on the operating system, and the location in which Python was installed. However, the following locations are common: |
| 22 | | * on Linux: /usr/lib/python2.X/site-packages |
| 23 | | * on Windows: C:\Python2.X\lib\site-packages |
| 24 | | * on MacOSX: /Library/Python/2.X/site-packages |
| 25 | | |
| 26 | | You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac` (the exact location depends on your platform). |
| 27 | | |
| 28 | | This cleanup is not mandatory, but it makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things. |
| 29 | | |
| 30 | | If you had the webadmin plugin installed, you can now uninstall it as it is now part of the Trac code base. |
| 31 | | |
| 32 | | === 2. Upgrade the Trac Environment === #UpgradetheTracEnvironment |
| | 17 | If you already have a 0.12 version of Trac installed via `easy_install`, it might be easiest to also use `easy_install` to upgrade your Trac installation: |
| | 18 | |
| | 19 | {{{ |
| | 20 | # easy_install --upgrade Trac==1.0 |
| | 21 | }}} |
| | 22 | |
| | 23 | If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows ([trac:#7265]). |
| | 24 | |
| | 25 | You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac `.egg` files from former versions. |
| | 26 | The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical: |
| | 27 | * on Linux: `/usr/lib/python2.X/site-packages` |
| | 28 | * on Windows: `C:\Python2.X\lib\site-packages` |
| | 29 | * on MacOSX: `/Library/Python/2.X/site-packages` |
| | 30 | |
| | 31 | You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac`. The exact location depends on your platform. This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as your installation is uncluttered by code or templates from a previous release that is not used anymore. As usual, make a backup before actually removing things. |
| | 32 | |
| | 33 | === 3. Upgrade the Trac Environment === #UpgradetheTracEnvironment |
| 58 | | Note that this procedure will of course leave your `WikiStart` page intact. |
| 59 | | |
| 60 | | === 4. Resynchronize the Trac Environment Against the Source Code Repository === |
| 61 | | |
| 62 | | Each [TracEnvironment Trac environment] must be resynchronized against the source code repository in order to avoid errors such as "[http://trac.edgewall.org/ticket/6120 No changeset ??? in the repository]" while browsing the source through the Trac interface: |
| 63 | | |
| 64 | | {{{ |
| 65 | | trac-admin /path/to/projenv resync |
| 66 | | }}} |
| 67 | | |
| 68 | | === 5. Steps specific to a given Trac version === |
| 69 | | ==== Upgrading to Trac 0.11 ==== |
| 70 | | ===== Site Templates ===== |
| 71 | | The templating engine has changed in 0.11, please look at TracInterfaceCustomization for more information. |
| | 57 | Note that this procedure will leave your `WikiStart` page intact. |
| | 58 | |
| | 59 | === 5. Refresh static resources === |
| | 60 | |
| | 61 | If you have set up a web server to give out static resources directly (accessed using the `/chrome/` URL) then you will need to refresh them using the same command: |
| | 62 | {{{ |
| | 63 | trac-admin /path/to/env deploy /deploy/path |
| | 64 | }}} |
| | 65 | this will extract static resources and CGI scripts (`trac.wsgi`, etc) from new Trac version and its plugins into `/deploy/path`. |
| | 66 | |
| | 67 | Some web browsers (IE, Opera) cache CSS and Javascript files aggressively, so you may need to instruct your users to manually erase the contents of their browser's cache, a forced refreshed (`<F5>`) should be enough. |
| | 68 | {{{#!comment |
| | 69 | Remove above note once #9936 is fixed. |
| | 70 | }}} |
| | 71 | |
| | 72 | === 6. Steps specific to a given Trac version === |
| | 73 | |
| | 74 | ==== Upgrading from Trac 0.12 to Trac 1.0 ==== #to1.0 |
| | 75 | |
| | 76 | ===== Python 2.4 no longer supported ===== |
| | 77 | Upgrade Python to at least 2.5, but not 3.0. |
| | 78 | |
| | 79 | ===== Subversion components not enabled by default for new installations |
| | 80 | The Trac components for Subversion support are no longer enabled by default. To enable the svn support, you need to make sure the `tracopt.versioncontrol.svn` components are enabled, for example by setting the following in the TracIni: |
| | 81 | {{{ |
| | 82 | [components] |
| | 83 | tracopt.versioncontrol.svn.* = enabled |
| | 84 | }}} |
| | 85 | The upgrade procedure should take care of this and change the TracIni appropriately, unless you already had the svn components explicitly disabled. |
| | 86 | |
| | 87 | ===== Attachments migrated to new location |
| | 88 | Another step in the automatic upgrade will change the way the attachments are stored. Create a backup of the `attachments` directory before upgrading. In case the `attachments` directory contains some files which are //not// attachments, the last step of the migration to the new layout will fail: the deletion of the now unused `attachments` directory can't be done if there are still files and folders in it. You may ignore this error, but better to move them elsewhere and remove the `attachments` directory manually. The attachments themselves are now all located in your environment below the `files/attachments` directory. |
| | 89 | |
| | 90 | ===== Behavior of `[ticket] default_owner` changed |
| | 91 | Prior to 1.0, the owner field of new tickets always defaulted to `[ticket] default_owner` when the value was not empty. If the value was empty, the owner field defaulted to to the Component's owner. In 1.0 and later, the `default_owner` must be set to `< default >` to make new tickets default to the Component's owner. This change allows the `default_owner` to be set to an empty value if no default owner is desired. |
| | 92 | |
| | 93 | ==== Upgrading from Trac 0.11 to Trac 0.12 ==== |
| | 94 | |
| | 95 | ===== Python 2.3 no longer supported ===== |
| | 96 | The minimum supported version of Python is now 2.4. |
| | 97 | |
| | 98 | ===== SQLite v3.x required ===== |
| | 99 | SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See [trac:PySqlite#UpgradingSQLitefrom2.xto3.x] for details. |
| | 100 | |
| | 101 | ===== [trac:PySqlite] 2 required ===== |
| | 102 | [trac:PySqlite] 1.1.x is no longer supported. Please install 2.5.5 or later if possible, see [#Tracdatabaseupgrade Trac database upgrade] below. |
| | 103 | |
| | 104 | ===== Multiple Repository Support ===== |
| | 105 | The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration. |
| | 106 | |
| | 107 | This may be of interest to users with only one repository, since there is now a way to avoid the potentially costly resync check at every request. |
| | 108 | |
| | 109 | ===== Resynchronize the Trac Environment Against the Source Code Repository ===== |
| | 110 | |
| | 111 | Each [TracEnvironment Trac environment] must be resynchronized against the source code repository in order to avoid errors such as "[trac:#6120 No changeset ??? in the repository]" while browsing the source through the Trac interface: |
| | 112 | |
| | 113 | {{{ |
| | 114 | trac-admin /path/to/projenv repository resync '*' |
| | 115 | }}} |
| | 116 | |
| | 117 | ===== Improved repository synchronization ===== |
| | 118 | In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories. |
| | 119 | |
| | 120 | While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories. |
| | 121 | |
| | 122 | Note that if you were using the `trac-post-commit-hook`, ''you're strongly advised to upgrade it'' to the new hook documented in the above references and [TracWorkflow#Howtocombinethetracopt.ticket.commit_updaterwiththetestingworkflow here], as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications. |
| | 123 | |
| | 124 | ===== Authz permission checking ===== |
| | 125 | The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka `[trac] authz_file` and `authz_module_name`), you must add `AuthzSourcePolicy` in front of your permission policies in `[trac] permission_policies`. You must also remove `BROWSER_VIEW`, `CHANGESET_VIEW`, `FILE_VIEW` and `LOG_VIEW` from your global permissions with `trac-admin $ENV permission remove` or the "Permissions" admin panel. |
| | 126 | |
| | 127 | ===== Microsecond timestamps ===== |
| | 128 | All timestamps in database tables, except the `session` table, have been changed from "seconds since epoch" to "microseconds since epoch" values. This change should be transparent to most users, except for custom reports. If any of your reports use date/time columns in calculations (e.g. to pass them to `datetime()`), you must divide the values retrieved from the database by 1'000'000. Similarly, if a report provides a calculated value to be displayed as a date/time (i.e. with a column named "time", "datetime", "changetime", "date", "created" or "modified"), you must provide a microsecond timestamp, that is, multiply your previous calculation with 1'000'000. |
| | 129 | |
| | 130 | ==== Upgrading from Trac 0.10 to Trac 0.11 ==== |
| | 131 | ===== Site Templates and Styles ===== |
| | 132 | The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information. |
| | 133 | |
| | 134 | If you are using custom CSS or modified templates in the `templates` directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance. |
| 84 | | === 6. Restart the Web Server === #RestarttheWebServer |
| | 147 | ===== Web Admin plugin integrated ===== |
| | 148 | If you had the [trac:WebAdmin] plugin installed, you can uninstall it as it is part of the Trac code base since 0.11. |
| | 149 | |
| | 150 | ===== New Default Configurable Workflow |
| | 151 | |
| | 152 | When you run `trac-admin <env> upgrade`, your `trac.ini` will be modified to include a `[ticket-workflow]` section. The workflow configured in this case is the original workflow, so that ticket actions will behave like they did in 0.10. |
| | 153 | |
| | 154 | Graphically, that looks like this: |
| | 155 | |
| | 156 | {{{#!Workflow width=500 height=240 |
| | 157 | leave = * -> * |
| | 158 | leave.operations = leave_status |
| | 159 | leave.default = 1 |
| | 160 | accept = new -> assigned |
| | 161 | accept.permissions = TICKET_MODIFY |
| | 162 | accept.operations = set_owner_to_self |
| | 163 | resolve = new,assigned,reopened -> closed |
| | 164 | resolve.permissions = TICKET_MODIFY |
| | 165 | resolve.operations = set_resolution |
| | 166 | reassign = new,assigned,reopened -> new |
| | 167 | reassign.permissions = TICKET_MODIFY |
| | 168 | reassign.operations = set_owner |
| | 169 | reopen = closed -> reopened |
| | 170 | reopen.permissions = TICKET_CREATE |
| | 171 | reopen.operations = del_resolution |
| | 172 | }}} |
| | 173 | |
| | 174 | There are some significant caveats in this, such as accepting a ticket sets it to 'assigned' state, and assigning a ticket sets it to 'new' state. So you will probably want to migrate to "basic" workflow; [trac:source:trunk/contrib/workflow/migrate_original_to_basic.py contrib/workflow/migrate_original_to_basic.py] may be helpful. See TracWorkflow for a detailed description of the new basic workflow. |
| | 175 | |
| | 176 | === 7. Restart the Web Server === #RestarttheWebServer |
| 90 | | === parent dir === |
| 91 | | If you use a trac parent env configuration and one of the plugins in one child does not work, none of the children work. |
| 92 | | |
| 93 | | === some core modules won't load === |
| 94 | | This can happen in particular with Python 2.3 on Windows when upgrading without uninstalling first. |
| 95 | | Some modules were previously capitalized and were changed to lower case, e.g. trac/About.py became trac/about.py. You may find such messages in the Trac log: |
| 96 | | {{{ |
| 97 | | ERROR: Skipping "trac.about = trac.about": (can't import "No module named about") |
| 98 | | }}} |
| 99 | | Remove the `Lib/site-packages/trac` folder and reinstall. |
| | 182 | === Customized Templates |
| | 183 | |
| | 184 | Trac supports customization of its Genshi templates by placing copies of the templates in the `<env>/templates` folder of your [TracEnvironment environment] or in a common location specified in the [[TracIni#GlobalConfiguration| [inherit] templates_dir]] configuration setting. If you choose to do so, be aware that you will need to repeat your changes manually on a copy of the new templates when you upgrade to a new release of Trac (even a minor one), as the templates will likely evolve. So keep a diff around. |
| | 185 | |
| | 186 | The preferred way to perform TracInterfaceCustomization is to write a custom plugin doing an appropriate `ITemplateStreamFilter` transformation, as this is more robust in case of changes: we usually won't modify element `id`s or change CSS `class`es, and if we have to do so, this will be documented in the [trac:TracDev/ApiChanges] pages. |
| | 187 | |
| | 188 | === !ZipImportError === |
| | 189 | |
| | 190 | Due to internal caching of zipped packages, whenever the content of the packages change on disk, the in-memory zip index will no longer match and you'll get irrecoverable !ZipImportError errors. Better anticipate and bring your server down for maintenance before upgrading. |
| | 191 | See [trac:#7014] for details. |
| 104 | | |
| 105 | | == Changing Database Backend == |
| 106 | | === SQLite to PostgreSQL === |
| 107 | | |
| 108 | | The [http://trac-hacks.org/wiki/SqliteToPgScript sqlite2pg] script on [http://trac-hacks.org trac-hacks.org] has been written to assist in migrating a SQLite database to a PostgreSQL database |
| 109 | | |
| 110 | | == Older Versions == |
| 111 | | |
| 112 | | For upgrades from versions older than Trac 0.10, refer first to trac:wiki:0.10/TracUpgrade. |
| 113 | | |
| 114 | | Note that downgrading from Trac 0.11 to Trac 0.10.4 or 0.10.5 is easy, but has to be done manually, e.g. |
| 115 | | {{{ |
| 116 | | $ sqlite3 db/trac.db "update system set value=20 where name='database_version'" |
| 117 | | }}} |
| 118 | | (upgrade can be redone the normal way later on) |
| | 196 | === Trac database upgrade === |
| | 197 | |
| | 198 | A known issue in some versions of [trac:PySqlite] (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket [trac:#9434]. |
| | 199 | |
| | 200 | === Parent dir === |
| | 201 | If you use a Trac parent env configuration and one of the plugins in one child does not work, none of the children will work. |
| | 202 | |
| | 203 | == Related topics |
| | 204 | |
| | 205 | === Upgrading Python === |
| | 206 | |
| | 207 | Upgrading Python to a newer version will require reinstallation of Python packages: Trac itself of course, but also [http://pypi.python.org/pypi/setuptools easy_install], if you've been using that. If you are using Subversion, you'll also need to upgrade the Python bindings for svn. |
| | 208 | |
| | 209 | ==== Windows and Python 2.6 ==== |
| | 210 | |
| | 211 | If you've been using !CollabNet's Subversion package, you may need to uninstall that in favor of [http://alagazam.net/ Alagazam], which has the Python bindings readily available, see [trac:TracSubversion]. That package works without tweaking. |
| | 212 | |
| | 213 | === Changing Database Backend === |
| | 214 | |
| | 215 | The [http://trac-hacks.org/wiki/TracMigratePlugin TracMigratePlugin] on [http://trac-hacks.org trac-hacks.org] has been written to assist in migrating between SQLite, MySQL and PostgreSQL databases. |
| | 216 | |
| | 217 | === Upgrading from older versions of Trac === #OlderVersions |
| | 218 | |
| | 219 | For upgrades from versions older than Trac 0.10, refer first to [trac:wiki:0.10/TracUpgrade#SpecificVersions]. |
